|
The fleshing machine LANA EFP is a very serviceable
dressing machine, being manufactured on the basis of
long experience. This machine is best suited for
fleshing all kinds of fur skins.
The solid construction mainly consists of stainless
and synthetic material, is corrosion-proof, and easy
and safe to operate, also for unskilled working staff.
Skins are placed over the rubber roller, hair side
facing downwards. They are pneumatically pressed
against the rotating fleshing cylinder. The contact
pressure of the pneumatic cylinder may be set to
the required level by means of a hand wheel, and
is indicated on a gauge. An adjustable rubber roller
ensures the correct distance for different thickness
of the skins and guarantees perfect fleshing.
Protective handling of furs is guaranteed by the
pneumatic controlled and thus gently swivelling
rubber roller.
The rubber roller is driven by a continuously variable
motor, ensuring that the fleshing speed may be adapted
most favourable to type, size and condition of skins.
The fleshing cylinder is equipped with 8 right and
8 left fleshing blades, made of best knife steel,
and runs in noiseless tumbler bearings. To sharpen
the fleshing blades, a grinding device is attached
to the rear of the machine, with which the blades
may be grinded over the entire width of the cylinder.
In addition the LANA EFP is provided with a water
sprinkling device for cooling and for rinsing the
carrion off.
Technical datas:
LANA EFP
Working widths: 65 cms / 70 cms / 100 cms / 125 cms / 150 cms / 160 cms
Speed of fleshing cylinder: approx. 1400 rpm
Drive of rubber rollers: continuous up to 25 meters/minute
Dimensions of machine:
LANA EFP65
width: 160 cms
depth: 100 cms
height: 130 cms
weight: approx. 700 kgs
Connected load: approx. 9 kWs, 400 volts, 3 phase
|
 |
